New Version Lap Steel 22.5 RetroFit Kit NutBridge FretBoard E-D-G GeorgeBoards™

$15.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store georgeboards
(1987) 98.2%,

Location: Belen, New Mexico
Ships to: US,
Item: 126737396745

All returns accepted:ReturnsNotAccepted
GeorgeBoards:GeorgeBoards
String Spacings:3/8 Nut .390 Bridge
Parts Included:1/2 tall Nut Bridge Black Peel N Stick Fretboard
New Version 22.5 RetroFit Conversion Kit:New Version 22.5 RetroFit Conversion Kit
Fret Board Color:New – Black – Roman Numerals
MPN:Does Not Apply
VGrooves:Set for .056 -.014 or similar gauges
Country/Region of Manufacture:United States
UpGrade your Import Steel to Pro Quality:Kit is Easy to install takes an hour or so
combined shipping 2nd item 1/2 price:combined shipping 2nd item 1/2 price part of ebay shipping charge
Suitable For:Rogue Rossetti Artisan,ToughPLA Polymer Sounds Great,Use these parts to make your own design
3D Nut and Bridge Material:ToughPLA Polymer Composite Black Color

Introductory SALE 15.99 usd Free Shipping USA New Version RetroFit Kit , The Foot Print of the Bridge is the Same as our original versionThe Nut is Skinnier and provides a little bit of room to help. Several Import Lap Steel Guitars Sell on eBay under the Brand Names including Rogue Rosetti Artisan. These lap steel guitars are 21 scale with low quality normal Guitar bridge Saddles and Formed Plastic nuts with normal guitar spacings. GeorgeBoards has created a DIY KIT to convert your import lap steel guitar into a playable 22.5″ scale with string spacing and height found on Professionally Made Modern Slide Steel Guitars. The Kit includes a Black Color 3D Printed ToughPLA Polymer Composite 1/2″ Tall Nut & Bridge – 3/8 Nut – .390 Bridge spacings VGrooves for string gauges .056 – .014 or similar gauges. Tunings like Open E-D-G Black peel n stick 22.5″ scale Fretboard pre cut to fit the above mentioned Brands.____________________________________________________________ The above photos and Video of the installation instructions are shown in black – this KIT contains a White FretBoard. It requires both Effort and Ingenuity to install this KIT. It takes only an hour or so – hand tools a battery drill – tape measure to quickly convert your new steel guitar into a professional paying and sounding instrument with our RetroFit Kit 1 To make the RetroFit you remove the strings – plastic nut – guitar saddles – plastic fretboard.2 Remove the Screws and save them from the metal piece under the saddles.3 Move the metal piece back to the edge of the end of the guitar. Blue Tape it to the edge to hold it in place.4 Use your tape measure to place the New Nut and Bridge temporarily – use the new fretboard to help place the nut.5 Make sure the Bridge is in front of the 3 screws at the back of the guitar not on top of them.6 Blue tape everything for temporary alignment. Tweak all of this until it lays out nicely.7 Mark where the Bridge hold down holes are going to go through the metal plate and into the wood below.8 Remove the metal plate and drill holes through it on a separate area so not to drill into the guitar.9 Return the metal plate and attach it to the guitar with the 3 little screws and 2 or the larger screws in their original holes except in their new positions. 10 Use 2 of the original larger screws to fill the holes in front of the metal plate.11 Use your tape measure to place the nut and bridge at 22.5″ – Blue tape both.12 Use #4 X 3/4″ Sheet Metal Screws to hold down the Nut and Bridge at 22.5″ Make sure the fretboard fits in front of the metal pickguard plate. Measure multiple times before drilling.13 Make sure the little ground wire is under the metal plate you moved back. The plate is your string receiver.14 Fill the holes from the plastic fretboard with chalk – putty – spackle – whatever.15 Clean off any debris or oils with rubbing alcohol and peel n stick down the new fretboard.16 Replace the original strings with new gauged strings for your choice of tuning the VGrooves will fit lighter and heavier gauges. 17 Remember this is an Open E-D-G type tuning Spacings 3/8 Nut – .390 Bridge VGrooves for .056 – .014 gauges or similar.18 Bring it up to pitch and adjust the pickup height to taste. We have a combined shipping discount built in to multi purchase.

Frequently Asked Questions About New Version Lap Steel 22.5 RetroFit Kit NutBridge FretBoard E-D-G GeorgeBoards™ in My Website

www.khicongchualanh.com is the best online shopping platform where you can buy New Version Lap Steel 22.5 RetroFit Kit NutBridge FretBoard E-D-G GeorgeBoards™ from renowned brand(s). www.khicongchualanh.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling New Version Lap Steel 22.5 RetroFit Kit NutBridge FretBoard E-D-G GeorgeBoards™ on www.khicongchualanh.com?

Frequently Asked Questions About New Version Lap Steel 22.5 RetroFit Kit NutBridge FretBoard E-D-G GeorgeBoards™ in My Website

What are the best-selling New Version Lap Steel 22.5 RetroFit Kit NutBridge FretBoard E-D-G GeorgeBoards™ on www.khicongchualanh.com?

Leave a comment Hủy